|Type||Description||Part number||Fits in|
|Controller||ESC MA-48.60||94M126-*||EPOS Mini 48/60-300.4 and .8|
|Controller||ESC MS-48.60||94M261-*||EPOS Mini 48/60-300.4 and .8|
|Accessory (Added to the controller/system after installation)||Battery block volt measurement set; 4 blocks, 5m||77CBS00340-*||EPOS Mini 48/60-300.4 and .8|
|Accessory (Added to the controller/system after installation)||Temperature probe kit, 5m||94M268-*||EPOS Mini 48/60-300.4 and .8|
|Add-on Option||Relay extension option with temp probe interface||94M129-*||EPOS Mini 48/60-300.4 and .8|
|Add-on Option||Battery LVD||94M130-*||EPOS Mini 48/60-300.4 and .8|
|Add-on Option||Load LVD ("PLD")||94M130-*||EPOS Mini 48/60-300.8 only|
The ESC controller family provides standard to advanced control and supervision of the EPOS Mini systems. The ESC controller operates in both 48V and 60V system set-ups.
The ESC controller family contains two alternative master modules, the standard level ESC MS-40.60 and the advanced ESC MA-48.60. All interfaces to system internal functions, sensors, etc. are made through separate interface boards to/from which all information is transferred between the master and peripheral functions. This arrangement allows the master to be disconnected and swapped out without having to disconnect all involved cabling.